|
Biogas Meter &
Greenhouse Gas Meter Plus: Biogas FT2+
The Biogas FT2+ gas meter provides an
extremely accurate instantaneous flow rate and
totalized flow for Biogas, Methane, Carbon Dioxide,
Greenhouse Gas (GHG), Natural Gas and other
gas mixtures.
Advanced solid
state electronic technology provides accurate
measurement for Greenhouse Gas, Biogas and Methane
for maximum Greenhouse Gas Credits and transactions.
Ideal Biogas
meter or Greenhouse Gas meter.
Accurate Biogas
& GHG Gas Measurement = Money!
The model
FT2+ thermal mass flowmeter and temperature
transmitter measures two important process variables
in one rugged instrument with no moving parts.
The FT2+ measures gas flow rate in standard
units (SCFM, NM3/Hr, etc) without the need for
expensive temperature or pressure compensation.
A 2 x 16 character backlit display is standard
to view flow rate, totals, elapsed time, process
gas temperature and alarms. The flow totalizer
is non-resettable for use with fuel gas flow
measurement of boilers, IC engines and other
regulated devices.
The FT2+ is available in insertion and in-line models. The
insertion meter is easily installed by drilling a hole in the pipe and
welding on a NPT coupling. A supplied compressing fitting secures
the probe in place. The in-line model is available several sizes
and include a built in flow conditioner that eliminates the need for
long, straight pipe runs. The meter can be ordered with flange or
NPT end connections. Both models are supplied with 316 stainless
steel wetted materials standard or Hastelloy C-276 as an option.
 
KEY FEATURES
- Very Accurate Biogas Meter
- Very Accurate Greenhouse Gas Meter
- Measures gas flow rate in SCFM, NM3/Hr
& many more
- Measures Totalized Flow
- Totalizer is non-resettable helping with
regulatory compliance
- Measures elapsed time helping with regulatory
compliance
- Measures process Temperature
- Measures Greenhouse Gas (GHG)
- Stands up to gas mixtures with Hydrogen
Sulfide (H2S)
MEASURED GASES
- Biogas & Digester Gas
- Methane
- Carbon Dioxide
- Greenhouse Gas (GHG)
- Natural Gas
- Mixtures of Gas
- Other Gases
BIOGAS FT2+ Gas Mass Flow
Meter BENEFITS:
LOW COST OF OWNERSHIP
- Very Low Maintenance
- Easy to Install
- Meters built to virtually any
pipe diameter
- No Annual calibration needed
- Indicator of digester gas
production changes
ACCURATE MEASUREMENT
- Gas flow +/- 1% of reading
- Gas flow +/- 0.2% of full scale*
- Flow Repeatability +/- 0.2%
of full scale
- Flow Response Time 0.9 seconds
- Temperature +/- 1.8 degrees
over -40 to 300 Deg F
REGULATORY COMPLIANCE
- Totalizer is non-resettable
- Elapsed time tracks hours
without power
- Accuracy in dynamic pressure,
flow, temperature conditions
- Helps compliance with new
Boiler and IC Engines regulations
Dresser
Roots Meter Series B3
Competitive Replacement
for Models:
- Roots Series B3 8C175 11C175
15C175 2M175 3M175 5M175
- Roots Series B3 7M175 11M175
16M175
- Roots Series B3 23M175 23M232
38M175 56M175
Why use the BIOGAS FT2+ Gas Meter?
- No Pressure or Temperature Compensation
Requirements or Extra Costs.
- Inline Model with Flanges ready
to "Drop In" to exisiting Piping,
No Rework
- No Moving Parts (Solid State),
Very Very Low Maintenance
- Extremely Accurate & Calibrated for
your Gas or Gas Mixture
- Many Standard Features Included not Expensive
Options
- Lower Lifetime Cost of Ownership - Saves
you Money
AG/Dairy Wastewater
Meter - VDP Flowmeter
The VDP Flowmeter provides a solution for AG
and Dairy wastewater and discharge water measurement
or as part of a nutrient management plan.
The VDP Wastewater Magnetic Flowmeter System
consists of the non-blocking flowtube and electronic
display. Valley Air Solutions’ Magnetic
flowmeters are a cost effective wastewater measurement
solution for many dairy, agriculture, cheese
plants, and other applications compared to conventional
flowmeter technology, because they improve on-site
measurement performance and decrease costs associated
with maintenance.
The VDP system uses unique sensing technology, which eliminates the
large and costly magnetic coils used in conventional magmeters, as well
as the need for a flowtube liner. The VDP flowtubes can be constructed
from steel or from polyvinylchloride (PVC) to be low cost and
lightweight. They are intended for use in plastic pipework in sizes 2”
- 12” and steel pipework 2" - 80".
 
KEY FEATURES
- Measures Instantaneous Flow
- Measures Totalized Flow
- Measures Totalized Daily Flow
- Tamper Resistant - Password Protected
VDP SYSTEM
BENEFITS:
LOW COST OF OWNERSHIP
- PVC, Carbon steel, stainless
steel, HDPE flowtube materials
- PVC diameters of 2" up to 12"
- Carbon Steel diameters of 2"
up to 80" (optional)
- Lined or unlined flowtubes
- No liner protectors necessary
- No grounding rings required
- Flowtubes built to virtually
any lay length
- Stock only spare sensors; not
spare meters
ACCURATE MEASUREMENT
(<0.5% OF RATE)
- Highest signal-to-noise ratio
of any magmeter
- Fastest time constant of 30
milliseconds
- Media conductivity > 0.08
µS/cm
- Compensation for common mode
voltage, media noise voltage and eddy current voltages
- Compensation for magnetic
particles, magnetite or temperature effects on the coils
REDUCED
MAINTENANCE
- Field removable / repairable
sensors; easy cleaning, wet tap options
- Guaranteed to extend cleaning
cycles on even the toughest coatings
- Flowtubes can withstand
continuous velocity of up to 30 fps (10 m/s)
- Standard conical electrodes;
optional long length electrodes for non-fluidic coatings
- Provides high accuracy even
if electrodes are completely covered by a fluidic coating.
NO NEED FOR
AUTO CLEANING!
UNMATCHED DURABILITY
- Measurement unaffected if
optional liner becomes damaged
- Multiple sensors provide
measurement redundancy
- Media coating guarantee
- Suitable for explosive
atmospheres: Entela approved to CSA and
NEC Class I, Div. 2 areas and ATEX Zone 2.
About Us -
Anaerobic Lagoons -
Methane Digesters - Products - Gas Purification
- Careers - Investor
Relations -
Dairy Survey - Contact
Us - Home
back to
top of page
|
|
|
